DM-500 KARGO PARAŞÜTÜ FRENLEME İPİ SALIVERME CİHAZI  – DM-500 MECHANICAL DEREEFING DEVICE

 

 

 

 

 

 

 

 

 

 

MODEL NUMBER: DM-500     PART NUMBER: DM-1000            NSN: 1670-01-586-3060  

 

USE: The Mechanical Dereefing Device allows for the dereefing of G-11 A/B/C/D cargo parachute canopies

DESCRIPTION: The Mechanical Dereefing Device is a reusable component that replaces the 1377-M500 (M-21), and MLU-58/B Pyrotechnic Reefing Line Cutter. This device uses a fabricated, re-usable segmented reefing line. Also used with special applications on other selected airdrop systems. Major components: main body, arming pin, time setting arm, arming wire and arming screw. Uses standard mounting bracket provided on the parachute.

OPERATION: The device works when the canopy of a G-11 A/B/C/D cargo parachute is deploying from the deployment bag. The device is mounted in the same brackets as the M-21 reefing line cutters, located on the special reinforced panels near the skirt of the canopy. During the deployment phase, the arming wire secured to the deployment bag is pulled. The device retracts the shaft after the preset delay for the G-11 A/B/C/D, allowing the looped ends of the segmented reefing lines to be free to dereef the canopy skirt. Two devices are required for the G-11 A/C and four devices for the G-11B/D cargo parachutes. This mechanical device has four settings usable from 2 to 8 seconds in 2-second  increments.

 

DAHA FAZLA BİLGİ İÇİN BAĞLANTI KURUNUZ – FOR MORE INFORMATION PLEASE CONTACT US.

 

DM-500 KARGO PARAŞÜTÜ FRENLEME İPİ SALIVERME CİHAZI   –  DM-500 ELECTRO-MECHANICAL DEREEFING DEVICE

 

 

 

 

 

 

 

 

 

 

 

 

MODEL NUMBER: DM-500     PART NUMBER: DM-10000B          NSN: 1670-01-630-0376

 

USE: The Electro-Mechanical Dereefing Device allows for the dereefing of G-11 A/B/C/D cargo parachute canopies

DESCRIPTION: The Electro Mechanical Dereefing Device is a reusable component that replaces the 1377- M500 (M-21), and MLU-58/B Pyrotechnic Reefing Line Cutter. This device uses a fabricated, re-usable segmented reefing line. Also used with special applications on other selected airdrop systems. Major components: main body, arming pin, time setting arm, arming wire and arming screw. Uses standard mounting bracket provided on the parachute.

OPERATION: The device works when the canopy of a G-11 A/B/C/D cargo parachute is deploying from the deployment bag. The device is mounted in the same brackets as the M-21 reefing line cutters, located on the special reinforced panels near the skirt of the canopy. During the deployment phase, the arming wire secured to the deployment bag is pulled. The device retracts the shaft after the preset 2-second delay for the G-11 A/B/C/D, allowing the looped ends of the segmented reefing lines to be free to dereef the canopy skirt. Two devices are required for the G-11 A/C and four devices for the G-11B/D cargo parachutes. This new device has a fixed 2-second delay.

 

DAHA FAZLA BİLGİ İÇİN BAĞLANTI KURUNUZ – FOR MORE INFORMATION PLEASE CONTACT US.